Flue Gas Air Preheater
Types: Tubular Type Regenerative Air Preheater Rotating Plate Regenerative Air Preheater Stationary Plate Regenerative Air Preheater
Applications: This type of air preheaters are a bit more straightforward in their design. They frequently seem to be large and boxy, and be able to take up a lot of space when compared with rotary air pre heaters.
Double Pipe Heat Exchanger0 out of 5
The heat exchanger is completed of concentric inside also exterior pipe and the Heat exchangers are used to transfer the energy from one substance to another.
Types: Counter flow Parallel Flow Heat Exchanger Multi tube Double pipe exchangers Single tube Double pipe exchangers Countercurrent Double Pipe Heat Exchanger Double Pipe Hairpin Type Typical Double Pipe Heat Exchanger
Thermal Design Calculation: Q = UA ?Tlm After determination of the required heat transfer surface area, Other Mechanical Design are made, With reference to Process applications.
Applications: Tubeside with High pressure Pasteurization Low allowable pressure drop Digester heating Heat recovery High flow rate ratios High terminal temperature differences. Pre-heating Its dependable and once-through Effluent cooling. Especially in cases of process-temperature crosses
Advantages: High Efficiency International high quality Low Maintenance Cost Quick Heat Transfer
Calorifier Tube Bundle Heat Exchanger0 out of 5
Types: U-Tube Battery = Calorifier Double Tube Heaters = Indirect Cylinder
Applications: Building Services Electrical Food Marine Offshore Steam Pharmaceutical Petrochemical Hazardous Area Process
Tube Bundle Heat Exchanger0 out of 5
Applications:For preheating natural gas Non corrosive gas Heating requirements Industrial washing machines Oil coolers Gas coolers Condensers Chemical Marine Engines, Word boilers
Advantages: Our Heat exchanger designed for installation with vertical tube bundle. Our new design increases the higher heat transfer rates.
Air Cooled Condenser0 out of 5
The nearly all accepted style of Air Cooled Condenser is the modularized (‘A’ frame structured design), used on industries and power plants of all sizes. Our design teams are updated new technology of the Air Cooled Condenser design for all types of industries. The Air Cooled Condenser design group will discuss about Technical aspects of Air Cooled Condenser for Power Plants and also more industries. The ‘A’ frame structured designs are mostly used in the power plants. Coil Design : Advanced Smart Circuitry Coil Technology Our Air Cooled Condenser Design Process Contains for Thermal Design.
Parts: Expansion bellows Hogger Ejection system Condensate extraction pumps Drain pot Pumps Inter condenser After condenser Condensate storage tank Gland steam condenser Drain Pot
Types: Natural Convection Forced Convection.
Components: Ejectors 3Bellows Instrumentation Pipe Lines Strainers Valves Civil construction Cleaning system Fans ,Motor & Gear box
Applications: All Thermal power plants Gas based Plants Coal based plants Oil Plants Biomass power plants Refrigerant hot gas piping Nuclear power plants
Fixed Tube Sheet Heat Exchanger0 out of 5
Materials Of Construction: Stainless Steel, Copper Alloys. Other material options as available.
Applications: Higher-pressure and Higher Temperature applications. It is used as a coolant for oil Hydraulic Fluid and oil in engines, Transmissions and hydraulic power packs. For heating or cooling oil, Water and chemical process fluids.
Advantages: Provides multi-tube-pass arrangements, Easy to cleaning and maintenance It has a Less cost than removable bundle heat exchangers, Provides maximum heat transfer surface per given shell and tube size. Ease of single tube replacement Provides multi-tube-pass arrangements.